EMS FORCE 5543 Pipe Sealant 250ml | Thread Sealant
EMS FORCE 5543 Pipe Sealant is a high-performance pipe thread sealant designed for reliable, leak-proof sealing of threaded connections. Its non-dripping formulation makes application clean and convenient.
The sealant works on metal-to-metal and plastic-to-metal threaded connections. Furthermore, it maintains its sealing performance under shocks, vibration and demanding operating conditions.
Key Features
- High-performance pipe thread sealant
- Suitable for metal-to-metal threaded connections
- Suitable for plastic-to-metal connections
- 100% leak-proof sealing solution for suitable threaded joints
- Non-dripping formulation for clean application
- Maintains sealing performance against vibration
- Resistant to water, oil, grease and many chemicals
- Suitable for pressure vessels
- Suitable for air compressors
- Suitable for hydraulic systems and tanks
- Suitable for applications requiring vibration resistance
- Suitable for Type H thick metal thread joints
- Conforms to TSE EN 751-1 Standard
- Drinking water approved for quality water applications
- Works effectively even at cold temperatures below 0°C
EMS FORCE 5543 Pipe Sealant Applications
EMS FORCE 5543 suits a wide range of industrial pipe and threaded connection applications.
Typical uses include:
- Metal pipe threads
- Plastic-to-metal pipe connections
- Hydraulic systems
- Hydraulic tanks
- Air compressors
- Pressure vessels
- Industrial piping
- Water systems
- Oil and grease lines
- Chemical service connections
- Vibrating machinery and pipe assemblies
Its strong sealing properties make it particularly useful where threaded connections face pressure, vibration or thermal changes.
Surface Preparation
Before applying EMS FORCE 5543, clean the mating parts thoroughly. Remove oil, grease, dirt and other contaminants. Also, ensure that the surfaces remain dry before application.
You can apply the sealant directly from the tube or use a suitable brush.
How to Apply EMS FORCE 5543
1. Apply the sealant
Apply the product around the leading threads of both the male and female fittings. Cover the threads with a continuous 360° application.
2. Remove excess sealant
Use absorbent tissue to remove excess compound. Follow the direction of the thread while wiping.
3. Assemble the fittings
Join the parts and tighten them correctly.
4. Allow curing
Leave the assembled connection for approximately 24 hours at 22–24°C to achieve full curing.
Disassembly Instructions
You can normally remove fixed parts with suitable hand tools.
However, if the connection remains difficult to disassemble at room temperature, apply local heat until the joint reaches approximately 250°C. Then separate the parts while hot.
After disassembly, remove cured sealant mechanically. Finally, clean any remaining residue with a suitable solvent such as acetone.
Vibration & Leak Protection
Threaded pipe connections can loosen or leak when equipment experiences vibration and pressure changes. EMS FORCE 5543 helps maintain the seal after assembly.
In addition, its non-dripping formulation makes the product convenient for workshop and industrial applications. The sealant also provides reliable resistance against water, oil, grease and many chemicals in suitable service conditions.
Drinking Water Applications
EMS FORCE 5543 has drinking water approval for quality water applications, making it suitable for relevant water-system installations where the approval requirements match the intended use.
Always verify the applicable technical and regulatory requirements before using the product in a specific potable-water system.
Product Specifications
| Property | Details |
|---|---|
| Product | EMS FORCE 5543 Pipe Sealant |
| Product Type | Threaded Pipe Sealant |
| Content | 250ml |
| Quantity | 1 Piece |
| Application | Metal & Plastic-Metal Threaded Connections |
| Formulation | Non-Dripping |
| Cure Time | Approx. 24 Hours at 22–24°C |
| Disassembly Heat | Up to approx. 250°C |
| Standard | TSE EN 751-1 |
| Country of Origin | Turkey |
Why Choose EMS FORCE 5543?
EMS FORCE 5543 provides a practical solution for sealing threaded pipe connections where leakage, vibration and pressure can create maintenance problems. Its non-dripping formula also allows clean and controlled application.
For hydraulic systems, air compressors, pressure vessels, tanks, water systems and industrial piping, EMS FORCE 5543 offers dependable threaded connection sealing.
