EMS FORCE TL-70 Threadlocker (High Strength) 250 ml
EMS FORCE TL-70 Threadlocker (High Strength) 250 ml is a high-strength anaerobic threadlocking adhesive designed to secure threaded metal fasteners and prevent loosening caused by vibration, shock, and mechanical stress. It forms a durable bond when confined between close-fitting metal surfaces, making it suitable for demanding industrial assembly and maintenance applications.
The 250 ml bottle provides a practical quantity for workshops, machinery maintenance, production lines, and industrial repair work. In addition, its high-strength formulation helps reinforce mechanical connections where reliable fastening and long-term vibration resistance are important.
Key Features of EMS FORCE TL-70
- High-strength anaerobic threadlocker
- Medium to high viscosity formulation
- Provides strong resistance to vibration and shock
- Strengthens threaded mechanical connections
- Helps prevent fastener loosening
- Suitable for rough metal surfaces
- Fills small gaps between mating metal surfaces
- Suitable for shafts, gears, pulleys, and other mechanical components
- Helps secure impellers and shafts
- Useful for rebuilding worn mechanical joints
- Designed for industrial assembly and maintenance
- Made in Turkey
EMS FORCE TL-70 Applications
EMS FORCE TL-70 works well in a variety of mechanical and industrial applications. For example, technicians can use it to secure threaded components exposed to continuous vibration or mechanical loads.
Machinery Maintenance
Use TL-70 to strengthen mechanical connections in industrial machinery. It can help secure components that experience vibration during regular operation.
Shafts, Gears and Pulleys
The adhesive is suitable for bonding and securing shafts, gears, pulleys, impellers, and cylindrical metal fittings. It helps maintain a stable connection during operation.
Bearings and Mechanical Assemblies
TL-70 can help secure bearing-related assemblies and reduce unwanted movement or dislocation of mechanical components.
Worn Joints
The compound can fill small gaps in worn mechanical connections, helping restore a more secure fit between mating components.
Vibration-Prone Equipment
Because TL-70 provides strong resistance to vibration, it is suitable for machinery and assemblies where conventional mechanical fastening may loosen over time.
How to Apply EMS FORCE TL-70
1. Clean the Components
First, clean the male and female mating surfaces. Remove cutting oil, grease, dirt, and other contaminants with an appropriate cleaning method.
2. Apply the Adhesive
Next, apply EMS FORCE TL-70 evenly to the required mating surfaces. Make sure the adhesive reaches the areas that require reinforcement.
3. Remove Excess Material
Use absorbent tissue paper to remove excess jointing compound around the assembly. This helps maintain a clean installation.
4. Assemble the Parts
Join the mating components and position them correctly. Avoid unnecessary movement after assembly.
5. Allow the Adhesive to Cure
For full curing, allow the assembled parts to remain undisturbed for approximately 24 hours at 22–24°C.
6. Disassembly
When necessary, use suitable hand tools to remove the mating components. Because TL-70 is a high-strength formulation, some assemblies may require additional force or controlled heating.
7. Difficult Disassembly
If normal disassembly proves difficult at room temperature, apply local heat until the joint reaches approximately 250°C, then disassemble while hot. Afterward, mechanically remove cured adhesive residue and clean the surfaces with a suitable solvent such as acetone.
Why Choose EMS FORCE TL-70?
EMS FORCE TL-70 provides a practical solution for applications that require a stronger mechanical connection and reliable resistance to vibration. Moreover, its medium-to-high viscosity helps the compound remain on the application area during assembly.
It is particularly useful for industrial machinery, mechanical assemblies, shafts, gears, pulleys, bearings, and other metal components where unwanted movement can affect equipment performance.
Product Specifications
| Property | Details |
|---|---|
| Product | EMS FORCE TL-70 Threadlocker |
| Type | High-Strength Anaerobic Adhesive |
| Viscosity | Medium to High |
| Application | Mechanical Threadlocking & Retaining |
| Content | 250 ml |
| Quantity | One Piece |
| Curing | Anaerobic |
| Full Cure Reference | Approx. 24 hours at 22–24°C |
| Disassembly Heat Reference | Approx. 250°C |
| Country of Origin | Turkey |
Suitable Industries
EMS FORCE TL-70 can support maintenance and assembly operations across several industries, including:
- Industrial machinery
- Automotive maintenance
- Mechanical engineering
- Manufacturing
- Production plants
- Equipment maintenance
- Pumps and rotating equipment
- Machinery repair workshops
- Metal fabrication
- Industrial assembly
