HORSE HM-500 Injectable Epoxy Anchor Adhesive
HORSE HM-500 is a high-performance injectable epoxy anchor adhesive designed for anchoring and structural reinforcement applications in concrete. It is a fast-curing, two-component modified epoxy resin anchoring system developed for fixing reinforcing bars and threaded bars in both cracked and uncracked concrete.
The HM-500 chemical anchor system is suitable for a wide range of construction and structural applications where reliable anchoring is required. It can be used for planting steel bars and bolts in concrete structures, building structure reinforcement, framework anchoring, steel and concrete structure connections, equipment fixation, and reinforcement work for highways, bridges and water-conservancy projects.
Key Features of HORSE HM-500
- Two-component modified epoxy resin anchoring system
- Suitable for cracked and uncracked concrete
- High strength and good toughness
- High tensile, flexural and compressive strength
- Moisture tolerant and suitable for humid environments
- Resistance to aging and thermal conditions
- Acid and alkali resistance
- Seismic resistance with no expansion forces
- Excellent thixotropy for side and overhead anchoring
- Special cartridge system with static mixer and dispenser
- 3:1 mixture ratio by weight
- 390 ml cartridge packaging
Applications of HORSE HM-500
HORSE HM-500 can be used for various concrete anchoring and structural reinforcement requirements, including:
- Rebar anchoring in concrete structures
- Threaded rod anchoring
- Anchor bolt fixing
- Building structure reinforcement
- Framework anchoring
- Steel structure and concrete structure connections
- Curtain wall and stone dry-hanging bracket reinforcement
- Basic fixation of various equipment
- Highway and bridge reinforcement projects
- Water-conservancy project rebuilding and reinforcement
- Advertisement board reinforcement
- Noise barrier and barricade reinforcement
Technical Specifications
| Product | HORSE HM-500 |
|---|---|
| Product Type | Injectable Epoxy Anchor Adhesive |
| Resin System | Two-component modified epoxy resin |
| Package | 390 ml cartridge |
| Mixture Ratio | 3:1 by weight |
| Density After Curing | 1.5 ± 0.1 g/cm³ |
| Viscosity of Mixture | 18–22 Pa·s |
| Tensile Strength | ≥55 MPa |
| Tensile Modulus | ≥3500 MPa |
| Flexural Strength | ≥70 MPa |
| Compressive Strength | ≥82 MPa |
| Thixotropy Index | ≥4.0 |
| Non-Volatile Matter Content | ≥99% |
Working Time and Curing Time
The operating and curing time of HORSE HM-500 varies according to ambient temperature. The product data sheet specifies an operable time of 60 minutes at -5°C, 45 minutes at 0°C, 30 minutes at 10°C, 15 minutes at 20°C and 20 minutes at temperatures of 30°C or above. Corresponding curing times are 72, 48, 24, 12 and 6 hours respectively. :contentReference[oaicite:2]{index=2}
How to Install HORSE HM-500
Proper hole preparation and installation are important for anchoring applications. The recommended construction process includes drilling, cleaning, blowing, injecting the adhesive, inserting the anchor and allowing it to cure.
- Drill the Hole: Drill the hole at the required position and according to the required diameter and anchoring depth.
- Clean the Hole: Brush and blow the hole to remove dust and debris. The product data sheet recommends repeating the brushing and blowing process.
- Prepare the Adhesive: Use the appropriate dispenser and static mixer with the HM-500 cartridge.
- Inject the Adhesive: Inject the adhesive from the bottom of the hole until the required amount is filled.
- Prepare the Steel Bar: Remove rust or contamination from the steel bar or anchor bolt before insertion.
- Insert the Anchor: Insert the steel bar, threaded rod or anchor into the hole in a single direction until it reaches the required position.
- Allow Curing: Keep the installed anchor undisturbed during the required curing period.
The manufacturer documentation describes the installation sequence as drill, brush, blow, inject, plant and cure. :contentReference[oaicite:3]{index=3}
Packaging and Storage
HORSE HM-500 is supplied in a 390 ml cartridge. The product data sheet specifies a shelf life of at least 12 months when stored correctly. Cartridges should be kept in their original packaging, stored upright in cool conditions between +50°F and +77°F, and protected from direct sunlight. :contentReference[oaicite:4]{index=4}
HORSE HM-500 for Concrete Anchoring
HORSE HM-500 provides an injectable epoxy anchoring solution for construction professionals, contractors, engineers and other users involved in concrete reinforcement and structural anchoring applications. Its documented applications include reinforcing bars, threaded rods, steel structures, concrete structures and various structural reinforcement requirements.
For professional construction and anchoring work, always follow the manufacturer’s technical requirements, recommended hole dimensions, anchoring depth, curing conditions and applicable safety procedures.
Why Choose HORSE HM-500?
HORSE HM-500 combines a two-component modified epoxy resin system with documented strength, adhesion, durability and resistance characteristics for demanding anchoring applications. Its application range covers both general concrete anchoring and structural reinforcement requirements.
HORSE HM-500 is available at 7Mart Pakistan for concrete anchoring, rebar fixing, threaded rod anchoring and structural reinforcement applications.
