Ressi EPO Anchor Pro 31: Injectable Anchor Epoxy for Concrete 390ml

Ressi EPO Anchor Pro 31 – Injectable Anchor Epoxy for Concrete

Ressi EPO Anchor Pro 31 is a high-strength, two-component injectable epoxy anchoring adhesive for concrete anchoring and structural reinforcement. It provides strong and durable bonding for steel rods, rebar, bolts, threaded rods, studs, and inserts.

Ressichem makes this anchor epoxy with pure modified epoxy resin and no styrene. In addition, the product offers excellent strength, toughness, chemical resistance, and long-term loading stability. Its low moisture sensitivity also makes it suitable for demanding anchoring work in damp environments and water-flooded holes.

Ressichem Anchor Epoxy for Concrete

If you need Ressichem Anchor Epoxy for concrete reinforcement and structural fixing, Ressi EPO Anchor Pro 31 offers a strong solution. It bonds bolts and rebar securely in concrete and also supports applications in cracked concrete.

Furthermore, you can use this anchor epoxy with threaded studs, inserts, anti-crack anchors, round steel, lead screws, and threaded rods. Therefore, it works well for many construction, reinforcement, and fixing applications.

Key Features of Ressi EPO Anchor Pro 31

• High-strength injectable anchor epoxy for concrete
• Strong bonding for bolts and rebar in concrete
• Suitable for cracked concrete applications
• Suitable for threaded studs and inserts
• Suitable for water-flooded holes
• Pure modified epoxy resin with no styrene
• Low moisture sensitivity
• High strength and strong cohesion
• Good toughness and long-term loading stability
• Good resistance to acid, alkali, and salt
• Good seismic performance
• Good fatigue and long-term stress resistance
• Good aging and heat resistance
• No creep at room temperature
• Side-by-side cartridge vacuum packaging
• Accurate mixing with a static mixer system

Applications of Anchor Epoxy for Concrete

Ressi EPO Anchor Pro 31 supports many construction and structural anchoring needs. Because it provides strong bonding, you can use it where steel components need reliable anchoring in concrete.

• Steel and anchor fixing in concrete construction
• Structural reinforcement anchoring
• Steel rod and rebar anchoring
• Threaded rod anchoring
• Machine and heavy equipment fixing
• Bracket fixing
• Structural insulating board and barrier fixing
• Rebuilding and expansion projects
• Curtain wall fixing
• Concrete reinforcement
• Fixing bolts, studs, and inserts

How to Use Ressi EPO Anchor Pro 31

1. Mark and Drill the Hole

First, mark the required hole position according to the installation requirements. Then drill the hole to the required depth and diameter. This helps create the required bonding area and pull strength.

2. Clean the Hole

Next, clean the drilled hole thoroughly. Blow and brush the hole to remove dust, loose particles, and other contaminants. For best results, brush and blow the hole at least three times.

3. Prepare the Epoxy

Next, connect the cartridge to the correct static mixer and dispensing system. Before injection, squeeze out the initial material until the adhesive mixes properly through the static mixer.

4. Inject the Anchor Epoxy

After preparing the epoxy, place the mixer nozzle near the bottom of the drilled hole. Then inject the adhesive while moving the nozzle gradually outward. Fill approximately two-thirds of the hole with epoxy.

5. Prepare the Steel or Anchor

Before installation, remove rust and contaminants from the steel bar, rebar, threaded rod, or anchor bolt. Proper surface preparation helps the epoxy form a strong bond with the steel.

6. Insert the Anchor

Next, insert the prepared steel rod, threaded rod, rebar, or anchor bolt into the hole. Push it toward the bottom in one direction so the epoxy can surround the anchoring element properly.

7. Allow Proper Curing

Finally, keep the installed anchor undisturbed during the required curing and maintenance period. Do not apply a load before the adhesive has cured adequately.

Why Choose Ressi EPO Anchor Pro 31?

Ressi EPO Anchor Pro 31 combines high bonding strength with resistance to demanding environmental conditions. Its modified epoxy formula provides strong cohesion and toughness. Moreover, the product offers resistance to acid, alkali, and salt.

In addition, the product provides long-term loading stability, good seismic performance, fatigue resistance, and aging resistance. Its low moisture sensitivity also makes it suitable for applications where moisture may occur.

Technical Characteristics

Ressi EPO Anchor Pro 31 – 390ml

Content: 390ml
Product Type: Injectable Epoxy Anchoring Adhesive
Made by: Ressichem

Ressi EPO Anchor Pro 31 comes in a 390ml cartridge. It supports professional concrete anchoring, reinforcement, and structural fixing applications.

Buy Anchor Epoxy in Pakistan

If you need a high-strength anchor epoxy in Pakistan for concrete reinforcement, bolt anchoring, rebar fixing, threaded rods, or structural work, Ressi EPO Anchor Pro 31 offers a suitable solution for demanding applications.

For more options, explore our anchor epoxy products. You can also visit the Ressichem brand page to explore related products.

Frequently Asked Questions

What is Ressi EPO Anchor Pro 31?

Ressi EPO Anchor Pro 31 is a two-component injectable epoxy anchoring adhesive for high-strength anchoring of bolts, rebar, steel rods, threaded rods, and inserts in concrete.

Is Ressi EPO Anchor Pro 31 suitable for concrete?

Yes. The product is designed for concrete anchoring and structural reinforcement. It also supports approved applications in cracked concrete.

Can I use this anchor epoxy in damp conditions?

Yes. The product has low moisture sensitivity and supports applications where moisture is present. The supplied product information also lists water-flooded holes as a suitable application.

What is the quantity of Ressi EPO Anchor Pro 31?

Ressi EPO Anchor Pro 31 comes in a 390ml cartridge.