Allopar Carb & Choke Cleaner 550 ml
Keep away from battery terminals and electrical connections. Spray with
can in upright position. Insert plastic tube firmly into valve button with
engine off and cool.
Remove the air cleaner and clean the outside of the carburetor all of the
linkage. Avoid spraying electrical connections. Manifold heat control: Spray
on exposed ends of cool heat riser shaft. Allow to penetrate and clean. Move
counterweight up and down until free with engine running Spray to both
ends of the choke valve shaft while working choke by hand. Spray down and
around the carburetor throat to remove deposits from the throttle plate area.
Do not spray down carburetor throat with engine off. Do not spray below
throttle plate. Choke: If choke sticks, remove choke cover and spray. PCV
Valve: Disconnect the crankcase side of the valve and spray into the open
end of the valve while working the plunger back and forth. Not
recommended for fuel-injected vehicles. Will not harm catalytic converters
oxygen sensors. Contains no methanol or methylene chloride. If sprayed
on painted surface, wipe off at once.
CLEANS: Carburetors, linkage, choke valves and unpainted metal parts.
BEST FOR: Improved performance and fuel economy, reduced emissions.