Magnaflux SKC-S NDT Cleaner & Remover 400ml
Magnaflux SKC-S NDT Cleaner 400ml is a professional solvent-based cleaner and remover designed for non-destructive testing (NDT) applications. It prepares inspection surfaces before penetrant testing and removes excess surface penetrant before the developer application.
The non-halogenated formulation works effectively on a wide range of suitable substrates. It removes oil, grease, dirt and other surface contaminants while leaving the inspection area clean and ready for testing.
Furthermore, SKC-S dries quickly and leaves minimal surface residue. This helps reduce the risk of false indications during liquid penetrant inspection.
Key Features of Magnaflux SKC-S
- NDT-approved solvent cleaner and remover
- Non-halogenated formulation
- Suitable for pre-cleaning before penetrant testing
- Removes excess surface penetrant
- Removes oil, grease and other contaminants
- Fast drying performance
- Dries without leaving significant residue
- Suitable for fluorescent and visible penetrant testing
- Helps maintain reliable inspection conditions
- Suitable for aerospace and industrial NDT applications
- Available in convenient 400ml packaging
- Made in the UK
SKC-S for Non-Destructive Testing
Liquid penetrant testing requires a clean inspection surface. Contamination can interfere with penetrant application and may affect the visibility of surface discontinuities.
Therefore, technicians can use Magnaflux SKC-S to clean the inspection area before applying penetrant. It can also remove excess penetrant from the surface before the developer stage.
Because the cleaner targets surface contamination, it supports a controlled inspection process without unnecessarily disturbing penetrant trapped inside relevant surface-breaking discontinuities.
Pre-Cleaning Before Penetrant Testing
Proper surface preparation plays an important role in liquid penetrant inspection. Oil, grease, dirt and other contaminants can interfere with the testing process.
SKC-S helps remove these contaminants from suitable components before penetrant application. Consequently, technicians can achieve a cleaner surface for inspection.
Typical Pre-Cleaning Process
- Remove loose dirt and contamination from the component.
- Apply SKC-S to the inspection area as required.
- Allow the solvent to evaporate.
- Ensure the surface is clean and dry.
- Proceed with the appropriate penetrant testing procedure.
Removing Excess Penetrant
After applying penetrant, technicians need to remove excess material from the component surface before applying developer.
SKC-S helps remove surface penetrant while supporting the inspection of relevant indications. Its fast-drying characteristics also help minimize unwanted residue on the inspection surface.
As a result, it can support clearer and more reliable penetrant testing.
Fluorescent and Visible Penetrant Testing
Magnaflux SKC-S supports applications involving:
- Fluorescent penetrant testing
- Visible penetrant testing
- NDT pre-cleaning
- Excess penetrant removal
- Post-inspection cleaning
It provides a versatile cleaning solution for facilities that perform different liquid penetrant inspection procedures.
Applications
Magnaflux SKC-S NDT Cleaner can be used for:
- Aerospace component inspection
- Industrial non-destructive testing
- Machinery inspection
- Metal component testing
- Weld inspection
- Surface defect inspection
- Pre-cleaning before penetrant testing
- Excess penetrant removal
- Post-inspection cleaning
NDT Compliance & Standards
SKC-S meets requirements associated with major NDT and aerospace inspection standards, including:
- AMS 2644
- ASME BPVC
- ASTM D129
- ASTM E1135
- ASTM E1417/E1417M
- ASTM E165/E165M-18
- ISO 3452-1
- ISO 3452-2
- MIL-STD-2132D
- Pratt & Whitney PMC 4366
These specifications make SKC-S suitable for professional inspection environments where controlled surface preparation and cleaner performance matter.
Why Use Magnaflux SKC-S?
A reliable NDT cleaner should remove surface contamination without creating unnecessary residue. Magnaflux SKC-S combines solvent cleaning with fast evaporation to help maintain a suitable inspection surface.
Moreover, its non-halogenated formulation provides a versatile option for professional penetrant testing workflows.
Whether you need to pre-clean a component, remove excess penetrant or clean an inspection area after testing, SKC-S offers a practical solution for professional NDT operations.
Product Specifications
| Property | Details |
|---|---|
| Product | Magnaflux Spotcheck SKC-S Cleaner & Remover |
| Product Type | Solvent-Based NDT Cleaner |
| Formulation | Non-Halogenated Solvent |
| NDT Application | Fluorescent & Visible Penetrant Testing |
| Primary Use | Pre-Cleaning & Excess Penetrant Removal |
| Drying | Fast Drying |
| Residue | Low-Residue Performance |
| Content | 400ml |
| Quantity | One Piece |
| Country of Origin | UK |
Important Handling Information
Use SKC-S according to the manufacturer’s instructions and applicable workplace safety requirements. Ensure adequate ventilation during use and follow the safety information provided on the product label and packaging.
For professional NDT work, always follow the applicable inspection procedure, equipment requirements and relevant industry standards.
Buy Magnaflux SKC-S NDT Cleaner 400ml
Magnaflux SKC-S NDT Cleaner 400ml provides professional cleaning and excess penetrant removal for liquid penetrant testing. It removes oils, grease and contaminants, dries quickly and supports low-residue inspection surfaces.
For aerospace, industrial and professional NDT applications, SKC-S is a versatile cleaner for preparing components and maintaining reliable penetrant testing procedures.
