Slide Mold Release Agent Silicone Spray 550ml
Slide Mold Release Agent Silicone Spray is a professional-grade silicone spray designed to help release molded parts smoothly from molds, dies, and industrial tooling. The specialized release formula creates a thin, uniform lubricating film between the mold surface and the molded material. As a result, it helps reduce sticking, tearing, drag marks, and surface defects during the demolding process.
Furthermore, Slide Mold Release Agent provides reliable release performance across various manufacturing and fabrication applications. It is suitable for injection molding, compression molding, vacuum forming, prototyping, casting, and other processes involving plastics, rubber, resins, and composite materials.
The aerosol can features an all-angle valve, allowing convenient application over complex mold shapes, contours, and hard-to-reach areas. Therefore, operators can apply the release agent more easily while maintaining consistent coverage across the mold surface.
Key Features & Benefits
Effective Mold Release
Slide Mold Release Agent creates a smooth silicone barrier between the mold and molded component. This barrier helps prevent sticking and allows finished parts to separate more easily from the mold.
Smooth & Clean Demolding
The silicone release film helps reduce friction during demolding. Consequently, it can help minimize tearing, drag marks, surface blemishes, and damage to delicate molded parts.
Uniform Silicone Coating
When applied correctly, the spray provides a thin and even lubricating layer across the mold surface. This helps maintain consistent release performance without unnecessarily heavy application.
All-Angle Aerosol Valve
The 360-degree aerosol valve allows flexible spraying from different angles. As a result, users can reach complex mold geometries, deep cavities, corners, and difficult tooling areas more conveniently.
Suitable for Multiple Materials
Slide Mold Release Agent can be used in molding and fabrication processes involving suitable plastics, rubber, resins, composites, and other molded materials.
Professional Industrial Application
The spray is suitable for manufacturing facilities, molding workshops, fabrication units, prototyping environments, and industrial production lines where efficient mold release is important.
Applications of Slide Mold Release Agent
Slide Mold Release Agent Silicone Spray is suitable for a wide range of molding and manufacturing applications, including:
- Injection molding
- Compression molding
- Vacuum forming
- Plastic molding
- Rubber molding
- Resin casting
- Composite fabrication
- Industrial mold and die release
- Workshop prototyping
- Casting applications
- Manufacturing production lines
- Industrial tooling maintenance
Additionally, the silicone spray can help lubricate suitable mold surfaces and tooling areas where reduced friction supports smoother production.
How to Use Slide Mold Release Agent
- Clean the mold surface and remove dust, dirt, old release material, and other contaminants.
- Shake the aerosol can thoroughly before application.
- Hold the can approximately 30 cm from the mold surface.
- Spray a thin and even layer across the required mold area.
- Allow the release film to settle before starting the molding process.
- For difficult or complex molds, apply additional light coverage where necessary.
- Avoid excessive application, as a thin and uniform coating generally provides better release control.
For best results, always test the product on the specific mold and material before full-scale production.
Why Use Slide Mold Release Agent?
A reliable mold release agent can help improve production efficiency by making molded parts easier to remove from tooling. Slide Mold Release Agent provides a convenient aerosol application and a silicone-based lubricating barrier that helps reduce sticking and friction.
Moreover, smoother demolding can help protect molded components and reduce the risk of surface damage. Therefore, it is a practical choice for manufacturing workshops, molders, fabricators, and production environments.
Technical Data
| Property | Typical Value |
|---|---|
| Product Name | Slide Mold Release Agent |
| Product Type | Silicone Mold Release Spray |
| Net Volume | 550ml |
| Application Method | Aerosol Spray |
| Valve Type | All-Angle / 360-Degree Valve |
| Recommended Spray Distance | Approximately 30 cm |
| Primary Function | Mold Release & Surface Lubrication |
| Suitable Applications | Injection, Compression & Vacuum Molding |
| Suitable Materials | Plastics, Rubber, Resins & Composites |
| Container Type | Pressurized Aerosol |
| Storage Limit | Below 50°C |
Safety & Precautions
Warning: Flammable aerosol. Keep Slide Mold Release Agent away from flames, sparks, hot surfaces, and other sources of ignition.
Use the product only in a well-ventilated area. Avoid breathing spray mist and avoid unnecessary contact with the eyes and skin.
The container is pressurized. Protect it from direct sunlight and do not expose it to temperatures above 50°C.
Do not puncture, crush, or burn the aerosol container, even when empty. Keep the product out of reach of children.
Before production use, test the release agent on a small area to confirm compatibility with the mold, material, and required surface finish.
Slide Mold Release Agent 550ml
Slide Mold Release Agent Silicone Spray 550ml offers convenient and effective mold release for professional molding and manufacturing applications. Its silicone-based release film helps reduce sticking, improve demolding, and maintain the surface quality of molded components.
Whether used for plastic molding, rubber molding, resin casting, composite fabrication, injection molding, or workshop prototyping, Slide Mold Release Agent provides a practical solution for smoother and more efficient mold release.
