Product Overview:
Zepoxy 350 is a clear epoxy system, which offers a longer open time, lower viscosity, higher gloss, higher clarity, superior wetting, and superior impact strength compared to standard market coating grades like Zepoxy 300. These properties make coatings or castings done with Zepoxy 350 superior in all aspects.
Key Features & Benefits:
Crystal Clear Finish: Exceptional visual transparency with low viscosity for a professional-grade look.
Extended Working Time: Boasts a generous pot life (up to 24 minutes at 30°C), giving you ample time to perfect your project.
Thermal Stability: Formulated to minimize heat buildup, ensuring a smooth cure without the risk of yellowing or warping.
Superior Strength: Provides high mechanical durability with a compressive ultimate strength of 81.7 MPa.
UV Protection: Integrated inhibitors protect your work from the damaging effects of sunlight.
Technical Highlights:
| Property | Specifications |
| Mix Ratio (Part A : Part B) | 100 : 50 (Theoretical) |
| Recommended Pour Thickness | 5mm |
| Coverage per KG | 9 SFT @ 1mm thick |
| Pot Life (@ 30°C) | 33 Minutes |
| Hardening Time | 36 Hours |
| Compressive Strength (Ultimate) | 78.3 MPa |
Application & Mixing Guidelines:
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change
the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour
the hardener first and then the resin. The mixed components should be thoroughly mixed for 3-4
minutes to ensure an even consistency. To avoid development of bubbles slowly mix for 5-10 mins.
Once the epoxy is mixed and poured gently pass warm air from a heat gun or hair dryer on slowest
speed setting, this will assist in removal of any bubbles generated during mixing.
Packaging Option:
Zepoxy Tabletop Deep Pour is available in three convenient kit sizes to suit any project scale:
- 1.5 KG Set: 1 KG Part A / 500g Part B
- 15 KG Set: 10 KG Part A / 5 KG Part B
- 45 KG Set: 30 KG Part A / 15 KG Part B
