Ressi EPO Anchor Pro 31: Injectable Epoxy Anchoring Adhesive:
- High strength adhesive for anchoring bolts or rebar in concrete
- Extreme strength load performance
- Approved for use in cracked concrete
- Prefect for threaded studs and inserts
- Suitable for water flooded holes
Product characteristics:
- Pure modified epoxy resin with no styrene
- Low moisture sensitivity, long term loading stability in damp environment.
- High strength, strong cohesion, good toughness, high performance.
- Anti-acid, alkali and salt, good seismic performance, fatigue and long term stress resistance.
- Aging resistance, good heat-resistance, no creep at room temperature
- Side by side cartridge vacum packing, with no bubble, accurate mixing ratio
Application:
- Structural insulating board and barrier fixing
- Machines fixing
- Rebuilding and expansion project
- Bracket fixing
- Steel and anchor in concrete construction
- Construction reinforcement anchoring
THE DETAILED CONSTRUCTION PROCESS OF Ressi EPO Anchor Pro 31
Mark Up Hole Position and Drill Hole:
Drill holes in designed position. The depth and diameter of the hole should meet the requirements in order to meet bonding area and ensure the pulling strength.
Clean Hole:
Clean and blow holes. Brush and blow for three times at least is recommended.
Glue Preparation:
Ressi EPO Anchor Pro 31 is equipped with a special static mixer and dispenser. Squeeze out the glue without fully mixed in the front part of the cartridge.
Injection:
Inject the glue from the bottom of the hole until fill the two-third of the hole.
Rust Removal of Steel Rebar:
Polish the steel bar or anchor bolt before inserted through the hole.
Anchoring:
Inserting in one single direction until to the bottom of the hole.
Standing and Curing:
Keep stand for maintenance before curing.
PRO-31
Note:
Ressi EPO Anchor Pro 31 Adhesive can be equipped with the following materials: screw thread steel, round steel, lead screw, threaded rod, anti-crack anchor.
