Zepoxy 350 Crystal Clear Epoxy Resin
Zepoxy 350 is a clear epoxy resin system with low viscosity, high gloss, high clarity, good wetting, and strong impact performance. Compared with standard coating grades such as Zepoxy 300, Zepoxy 350 offers a longer open time and improved clarity and gloss. These features make it suitable for clear coatings and castings.
If you are looking for Zepoxy 350 epoxy resin in Pakistan, 7Mart provides product information and technical details for this epoxy system. In addition, its low viscosity helps the mixed resin flow smoothly during application.
Zepoxy 350 Epoxy Resin Features
Zepoxy 350 offers several useful features for coating and casting projects:
- Clear finish: Provides high clarity and a glossy appearance.
- Low viscosity: Offers a low-viscosity liquid system for easier flow.
- Longer working time: Provides up to 33 minutes of pot life at 30°C.
- High gloss: Produces a clear and glossy surface.
- Good wetting: Provides superior wetting compared with standard coating grades.
- Impact strength: Offers superior impact strength compared with standard coating grades.
- Mechanical strength: Provides a compressive strength of 78.3 MPa under the stated test conditions.
Therefore, crystal clear epoxy resin applications can benefit from the clarity, flow, and strength properties of Zepoxy 350.
Clear Epoxy Resin for Coatings and Castings
Zepoxy 350 is designed as a clear epoxy system for coatings and castings. Its low viscosity and clear appearance make it suitable where a smooth, glossy, and clear finish is required.
Furthermore, the technical data sheet recommends a maximum casting thickness of 5 mm. The product provides a coverage rate of approximately 9 square feet per kilogram at 1 mm thickness.
Deep Pour Epoxy Resin Specifications
For projects that require a deep pour epoxy resin, always follow the recommended casting thickness and mixing instructions. Zepoxy 350 has a recommended maximum casting thickness of 5 mm according to its technical data sheet.
Moreover, the product has a pot life of 33 minutes for a 300 g mix at 30°C. At 45°C, the pot life decreases to 20 minutes. The hardening time is 36 hours, while the stated full cure time is 7 days.
Zepoxy 350 Technical Specifications
| Property | Specification |
|---|---|
| Product Type | Clear Epoxy System |
| Mix Ratio (Part A : Part B) | 100 : 50 |
| Mix Viscosity at 25°C | 500–800 cPs |
| Appearance | Low viscosity, clear liquid |
| Coverage per KG | 9 SFT @ 1 mm thick |
| Recommended Maximum Casting Thickness | 5 mm |
| Pot Life at 30°C | 33 minutes |
| Pot Life at 45°C | 20 minutes |
| Gel Time at 34°C | 2 hours 15 minutes |
| Hardening Time | 36 hours |
| Full Cure | 7 days |
| Flexural Strength | 46.1 MPa |
| Compressive Strength | 78.3 MPa |
| Flash Point | >126°C |
These values come from the Zepoxy 350 technical data sheet and represent typical results under laboratory conditions.
How to Mix Zepoxy 350 Epoxy Resin
Correct mixing is important for proper curing and mechanical performance. First, follow the specified 100:50 Part A to Part B ratio. Do not change this ratio, because an incorrect ratio can affect drying and mechanical properties.
Mixing Steps
- First, measure Part A and Part B according to the 100:50 ratio.
- Next, pour the hardener first and then add the resin.
- Mix both components thoroughly for 3–4 minutes.
- Then, mix slowly for another 5–10 minutes to help reduce bubbles.
- Finally, pour the mixed epoxy carefully onto the prepared surface.
After pouring, gently pass warm air over the surface using a heat gun or hair dryer on the lowest speed setting. This process can help remove bubbles created during mixing.
Zepoxy 350 Packaging Options
Zepoxy 350 is available in three kit sizes. Each kit contains Part A resin and Part B hardener in the specified ratio.
| Kit Size | Part A | Part B |
|---|---|---|
| 1.5 KG Set | 1 KG | 500 g |
| 15 KG Set | 10 KG | 5 KG |
| 45 KG Set | 30 KG | 15 KG |
Safety and Handling
Always handle Zepoxy 350 with appropriate care. The product safety data sheet advises users to avoid contact with the eyes, skin, and clothing. Also, use adequate ventilation during handling.
- Wear protective gloves.
- Use suitable eye protection.
- Use protective clothing where required.
- Ensure adequate ventilation during use.
- Keep containers tightly closed when not in use.
- Store the product in a cool, dry, and well-ventilated area.
For additional health and safety information, refer to the product MSDS.
Buy Zepoxy 350 Crystal Clear Epoxy Resin in Pakistan
Looking for Zepoxy 350 crystal clear epoxy resin in Pakistan? Explore Zepoxy 350 at 7Mart for clear coating and casting applications.
You can also explore more Zepoxy products available at 7Mart. For related epoxy products, visit the epoxy product category.
For additional manufacturer information, visit the official Ressichem website.
